Product description |
|
Place of Origin |
SUIZHOU, CHINA |
Brand Name |
CLW |
Certification |
CCC, SGS, BV, DOT, GCC |
Model Number |
CLW5120 |
Payment & Shipping Terms |
|
Minimum Order Quantity |
1 |
Unit Price |
Negotiable |
Packaging Details |
naked,waxed,bulk ship,ro-ro |
Delivery Time |
30-35 days |
Payment Terms |
L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability |
500 Unit/Month |
[Product Introduction] The sewage suction and purification vehicle is mainly used for the rapid pollution-free treatment of septic tank, which is a traditional upgrade model of sewage suction and dung suction car. The car is mainly composed of automobile chassis, generator set, sewage separation system, dosing system, stacking screw dehydration system, high-pressure cleaning system, etc. The dirt from the septic tank can be pumped into the vehicle tank through the vacuum pump, After preliminary filtration in the roller separation compartment, Separation non-degradable inorganic substances (such as sanitary napkins, rags, etc.), The isolated dirt was dried out and dehydrated, Can be bagged and carried away, When the household garbage disposal; Into the preliminary filtered sewage, Will go into the coagulation tank, Through and with the liquid solution reaction, Thus condensing, The reaction sewage enters the stacking screw dehydrator, Conduct the dehydration treatment, The dehydrator can press the condensed dung residue into a dung cake, When organic fertilizer; And the sewage after separated again, Can meet the national urban sewage discharge standards, Disit into the sewage pipe.
Sewage purification car will be septic tank sewage classification treatment, neither cause secondary pollution, but also will be pressed into organic fertilizer, the full use of the dirt, and finally discharged out of the standard of sewage. The suction and purification car is standard equipped with a small washing pump, which can wash the suction and purification equipment. At the same time, according to customer needs, it can be equipped with imported 16 MPa high pressure pump or domestic 21 MPa high pressure pump, with 2 cubic cleaning water tank, 60 meters high pressure pipe. The sewage purification car can produce 500-800 Kg per hour, according to the density of septic tank sewage, the speed of sewage treatment is different, generally 8-15M³ / h.
[Vehicle structure] Sewage suction and purification part: automobile chassis, box structure, the main internal fixtures are: generator, vacuum pump, sewage pump, separation box, sewage tank, add medicine box, coagulation tank, screw folding machine. High-pressure cleaning part: water tank, plunger pump, hydraulic reel composition.
[Notes] The above product introduction is only for reference. Please refer to the contract for the car order, and the company reserves the right to improve the product.
THE SPECIFIC PARAMETERS
Main technical parameters | |||
outline dimension (mm) | 5998×2060×2980,3180 | Actual volume (m3) | |
gross mass (kg) | 7360 | Rated mass (kg) | |
curb weight (kg) | 7230 | Front-row passenger (person) | 2 |
axle weight (kg) | 2640/4720 | exemption from conscription | yes |
Top speed (km/h) | 110 | fuel oil | deny |
Fuel consumption (L / 100 Km) | environmental protection | yes | |
Fuel type | diesel oil | effluent standard | Six countries |
other | Optional cab with chassis; only 3308 wheelbase, side protection adopts cold bent steel / Q235-B, bolt connection, rear protection adopts Q235-B, welded connection, rear protection section height size 120mm, section width size 60mm, and lower edge 470mm above ground. Optional box body exterior style. Working principle of the suction and purification vehicle: the sewage is pumped into the sewage separator through the sewage pump, separate the water and impurities in the sewage separator, and finally discharge the water without impurities. The main components installed are vacuum pump and sewage pump. ABS model / manufacturer: ABS / ASR-12V-4S / 4M / Xiangyang Dongfeng Longcheng Machinery Co., LTD. |
Chassis parameters | |||
Chassis model | EQ1075SJ3CDF | Chassis brand | Dongfeng brand |
number of axles | 2 | front gauge (mm) | 1525,1519,1503,1613 |
wheel base (mm) | 2700,2950,3308 | rear track (mm) | 1498,1516,1586,1670 |
Number of tires: | 6 | tyre size | 7.00R16,7.00R16LT |
Close to the corner of departure | 27.7/15 | Front suspension and rear suspension | 1055/1635 |
engine parameter | |||
engine type | Engine production enterprise | displacement (ML) | power (KW) |
D20TCIF1 | Kunming Yunnei Power Co., LTD | 1999 | 93/126 |
YCY24140-60 | Guangxi Yuchai Machinery Co., LTD | 2360 | 103/140 |
CA4DB1-11E6 | China FaW Group Co., Ltd | 2207 | 81/110 |
ZD30D16-6N | Dongfeng Light Engine Co., Ltd | 2953 | 120/163 |
CY4BK461 | Dongfeng Chaoyang Chachai Power Co., Ltd | 3707 | 95/129 |
CY4BK161 | Dongfeng Chaoyang Chachai Power Co., Ltd | 3856 | 105/142 |
Q23-115E60 | Anhui Quanchai Power Co., LTD | 2300 | 85/115 |
H20-120E60 | Anhui Quanchai Power Co., LTD | 2000 | 90/122 |
CA4DB1-13E6 | China FaW Group Co., Ltd | 2207 | 95/129 |
Q28-130E60 | Anhui Quanchai Power Co., LTD | 2800 | 96/130 |
D20TCIF11 | Kunming Yunnei Power Co., LTD | 1999 | 93/126 |