State six 11 square Dongfeng Tianjin food kitchen garbage truck chassis configuration

Dongfeng special vehicle chassis, Tianjin a row of half can turn the cab, equipped with Cummins 2100 horsepower diesel engine, 4 meters 5 wheelbase, six gear gearbox, gas brake, ABS, dynamic turn, clutch power, 9.00 steel wire tires, with urea tank and in line with the national six emission standards of the exhaust purification system.

 State six 11 square Dongfeng Tianjin food kitchen garbage truck product characteristics

1, the appearance of beautiful and generous dustbin horizontal section for square round, longitudinal section for rectangular frame, both sides of the arc shape, the vehicle appears beautiful and generous.
2. With the function of dry and wet separation, it can realize the initial separation of oil and water of kitchen waste and garbage capacity reduction in the box, and is equipped with large capacity sewage tank with strong loading capacity.
3, the sealing between the dustbin and the back door assembly is good back door hydraulic opening, hydraulic lock, between the dustbin and the back door 

assembly with special reinforced rubber strip sealing, good sealing, to eliminate the secondary pollution.
4, the chain elevator can hang 240L national standard plastic trash can, feed inlet cover hydraulic switch.
5. The centralized electronic control in the cab (external manual operation of the elevator), the operation of the rear door lock and the rear cover switch are set up with the anti-error operation device to ensure the accurate and reliable operation of each mechanism.
6, the box with the cleaning device hydraulic motor to drive the high-pressure pump, with a water tank.

 Special performance description of tank type kitchen garbage truck

Will barrel eat hutch swill garbage by special lift slowly, on the top of the car into the car (trunk can be divided into box and tank), is on the garbage after strong push plate extrusion, tank solid-liquid separation, separate liquid into the bottom of the tank, the solid waste compressed stored in the tank, smaller size, so repeatedly to fill after send * * eat hutch waste resources optimization processing plant.

1, the appearance of beautiful and generous dustbin horizontal section for the square frame, longitudinal section for the trapezoidal frame, both sides and the top surface are circular arc shape, the whole machine appears beautiful and generous.
2, the lifting organization will raise the garbage standard bucket after * * roof, and then pour the kitchen garbage in the bucket into the car through the turning mechanism. The standard bucket is then returned to the ground through the lifting device;
3. Push plate device: the car is equipped with push plate device, which can moderately compress and shirk garbage;
4, strong loading capacity and can realize the initial separation of the kitchen garbage oil and water and garbage capacity reduction in the box, and equipped with a large capacity sewage tank.
5, good sealing between the dustbin and the rear door assembly between the dustbin and the rear door assembly with special reinforced rubber strip sealing, good sealing, to eliminate the secondary pollution..
6, high reliability and safety using electrical and liquid combined * *, and set up the safety protection switch, to ensure the accurate and reliable action of each mechanism.
7, optional engine power output automatic * * engine power output to achieve automatic * *, non-operation, the engine idle state, operation, the engine automatic acceleration, to meet the requirements of operating power. Avoid power loss and system heating, reduce oil consumption, good economy.

State six 11 square Dongfeng Tianjin food kitchen garbage truck vehicle main technical parameters