Set multi-functions in one

Washing car integrates the functions of sweeping car, sprinkler and high pressure cleaning car, and has a variety of functions such as road cleaning, road cleaning, high pressure cleaning, low pressure washing, curb washing, garbage collection, sewage recovery, spray dust and road isolation wall cleaning, small advertising cleaning and so on.

Advanced vehicle structure

1: Adopt the layout of water box front, after the dustbin, semi-closed auxiliary engine compartment, left and right corner door + double door, personnel can easily enter, the overall structure is compact, convenient maintenance;

2: Adopt the structure of "middle two vertical sweep + middle wide suction nozzle (built-in high pressure water spray rod) + left and right high pressure side spray rod".

 Silly operation

1: Using advanced intelligent one-key control technology, all operations are completed in the cab. During the operation, only after the operation mode is selected, the start and shutdown of each operation mechanism are automatically controlled by the program.

2: There are 9 operation modes, such as full washing and sweeping operation, left washing and sweeping operation, right washing and sweeping operation, full road sweeping operation, left road sweeping operation, right road sweeping operation, full cleaning operation, left washing operation and right washing operation.

3: On the basis of the one-button control technology, add the manual throttle control system of the auxiliary engine, which can independently adjust the throttle size according to the road conditions, effectively enhance the washing and sweeping effect, and reduce the fuel consumption.

 Car safety

1: up to 16 voice prompts and music alarms, accurately broadcast various safety tips and fault points.

2: With the reversing protection device, in case of emergency reversing during the operation, the intelligent control system will automatically stop the operation and withdraw the sweep plate, suction cup and side spray rod;

3: Protect the lifting bin from rollover; with maintenance safety protection.

4: The unique side brush anti-collision mechanism can effectively protect the side brush mechanism and avoid damage caused by the flushing device hitting the road tooth at any time;

5: With the safety protection device for lifting the dustbin, when the back door is not open, to ensure that the dustbin can not be lifted.

6: When the safety stick is not put down, the intelligent system will prohibit the return of the dustbin, which can effectively prevent accidents during maintenance.

7: The secondary engine has a car clutch. When starting and stopping, the cylinder drive clutch is separated and engaged after delay. The separation and engagement of the clutch are automatically controlled by the electronic control system without manual operation, effectively avoiding the damage of the fan, high pressure water pump and engine.

8: Low water level sensing alarm system in the water box, automatic alarm when there is no water to prevent the water damage.

9: The high definition monitoring probe is set on the right scanning plate and the back of the dustbin, and the high definition LCD monitor is set in the cab. The picture can be switched to the right scanning plate and the back of the dustbin respectively. During operation, the working condition of the scanning plate and the quality of the vehicle can be monitored.

10: A manual pump is added in the hydraulic system, so that the system in special circumstances, such as the auxiliary engine can not work normally, the manual pump can complete the garbage dumping and the reset of each hydraulic cylinder.

11: with the hydraulic leakage prevention function.

design feature

1: Adopt medium full floating double suction mouth super wide suction nozzle, suction mouth diameter of 180mm. Its built-in long row of high pressure water spray rod has small ground clearance and large water impact force, which can directly send sewage to the suction port, with less operation splash and high sewage absorption rate.

2: the vehicle exterior adopts the tendon structure, effectively reduce the weight, enhance the strength and stiffness of the bin;

3: The whole vehicle adopts three-section type, front connected water tank, middle connected machine warehouse cover, reasonable structure, disassembly, convenient maintenance.

4: The back door closing locking mechanism adopts the plug type, good stability, good airtightness.

5: The sewage tank adopts a large plane slope structure, and the maximum discharge Angle can reach 50 degrees, which is easier to dump garbage.

6: The sewage tank is equipped with anti-overflow alarm device and high-pressure spray cleaning device, the anti-overflow alarm device can prevent the sewage from overflowing from the straw, causing secondary pollution;

7: High-pressure spray cleaning device can automatically clean the sewage tank after dumping garbage, greatly reducing the labor intensity of the operators.

8: The side rear is equipped with mechanical automatic winding coil, with 20m high pressure hose and cleaning gun of different angles, which can be used to clean the body and other equipment and facilities.

3: The whole vehicle adopts three-section type, front connected water tank, middle connected machine warehouse cover, reasonable structure, disassembly, convenient maintenance.

4: The back door closing locking mechanism adopts the plug type, good stability, good airtightness.

5: The sewage tank adopts a large plane slope structure, and the maximum discharge Angle can reach 50 degrees, which is easier to dump garbage.

6: The sewage tank is equipped with anti-overflow alarm device and high-pressure spray cleaning device, the anti-overflow alarm device can prevent the sewage from overflowing from the straw, causing secondary pollution;

7: High-pressure spray cleaning device can automatically clean the sewage tank after dumping garbage, greatly reducing the labor intensity of the operators.

8: The side rear is equipped with mechanical automatic winding coil, with 20m high pressure hose and cleaning gun of different angles, which can be used to clean the body and other equipment and facilities.

 Quality accessories

1: The high pressure water pump adopts the imported pump from Germany. When the high pressure water pump starts and the working water valve switches, the pump discharges automatically. Through the air circulation, safety valve and overflow valve triple protection, effectively prevent high pressure pump damage.

2: Imported high-quality hydraulic valve, which can ensure the stability and fluency of the hydraulic action of the vehicle.

3: Imported high-quality hydraulic motor, can ensure the stability of the sweep disc rotation, long service life.

4: The dustbin is made of 4mm stainless steel, which can prevent general corrosion and prolong the service life.

5: The hydraulic system gear pump adopts domestic high-quality pump, with reliable performance, and the manufacturer of valve parts is an internationally recognized professional hydraulic component manufacturer.

6: The low pressure water pump adopts the domestic well-known brand Hangzhou Weilong sprinkler pump, using the pneumatic ball valve control in the driving room, the maximum hedge width can reach 21 meters.

7: Use high performance engineering plastic partition sleeve, good wear resistance, butter free maintenance free, save manpower and material resources.