Dongfeng Dorika cleaning suction car configuration

Dongfeng Dolica D7 new cab, Guangxi Yuchai 165 horsepower national six engine, 3800 wheelbase, 192 double girder, Dongfeng Dana 5.5 tons rear axle, 245/70R19.5 vacuum tires, air brake, with air conditioning, electric Windows, central control lock, multi-function steering wheel, ABS, Wanliyang 6-speed transmission.

Suction tank: 7 cubic, tank body 6 mm carbon steel, suction part: Equipped with SK-12 water circulation pump, reasonable design of wave board in the middle of the tank, overflow valve installed on the top of the sewage tank, vacuum pump inlet with two stainless steel filters (to prevent dirt into the pump), vacuum pump with drainage valve, pump base design height of more than 26 cm above the ground, with water pollution interworking function, tank tail installation, a 100 suction port, a 220 pneumatic open sewage port, The right side is pumped, the tank body is hydraulically lifted, the back cover is hydraulically opened, and the suction tank and the cleaning tank are interconnected.

Water tank cleaning: 3 cubic,6 mm carbon steel, fire water on both sides, air control push water, with filter, using Germany Pinf high pressure pump, 22 mpa, 215 liters flow, with 60 meters of inner diameter 19# high pressure pipe, a set of combined nozzle, platform on both sides of the tank, back 700mm high pressure cleaning coil, hydraulic redraft, the front of the tank with tank mouth, with shower function (after high-pressure pipe operation, When recycling, you can wash the high-pressure pipe), both sides of the flat pattern plate pipe platform, with guardrail, the operating system is arranged in the operating box, there are operating instructions and precautions, high-pressure three-way valve and suction four-way valve position are installed with a diameter of 100 seismic pressure gauge, can resist the vibration of the working environment and reduce the impact of media pressure pulsation, standard with a toolbox. LED working light, other standard configuration.